Generic filters
Exact matches only
Archives

on

Pro Comp 2″ Lift Rear Add A Leafs (firm ride)

PCAAL (P13120)

Pro Comp suspension Add-A-Leaf kits are the perfect solution when 1.5 Inch to 2.5 Inch of raised height is required. Pro Comp suspension rear Add-A-Leafs can be used in conjunction with lift blocks in order to strengthen the integrity of an existing leaf spring pack. This is very helpful when trying to renew the height and strength of a rear spring suffering fatigue due to age and heavy loads. For some vehicles, Pro Comp suspension offers both long and short Add-A-Leaf kits. The long Add-A-Leaf will usually install directly under the main leaf (with mounting eyes) allowing it to work towards eliminating spring/axle wrap up while keeping the vehicle’s existing ride quality. All kits include two single leafs and new centering bolts. Degree shims may be required to realign rear driveshaft angles. Pro Comp suspension recommends using new U bolts, flat washers, high nuts and spring clips whenever modifying or changing leaf spring packs.
Features
  • Perfect Solution When 1.5 Inch To 2.5 Inch Of Raised Height Is Required
  • Rear Add-A-Leafs Can Be Used In Conjunction With Lift Blocks In Order To Strengthen The Integrity Of An Existing Leaf Spring Pack
  • For Some Vehicles, Pro Comp Suspension Offers Both Long And Short Add-A-Leaf Kits
  • All Kits Includes Two Single Leafs And New Centering Bolts
  • Limited Lifetime Warranty
Spring Width (IN): 2-1/4 Inch
Style: Short
Quantity: Set Of 2
Fits:
1975, 1976, 1977, 1978, 1979, 1980, 1981, 1982 Chevrolet LUV
1972, 1973, 1974 Chevrolet Luv Pickup
1982, 1983, 1984, 1985, 1986, 1987, 1988, 1989, 1990, 1991, 1992, 1993, 1994, 1995, 1996, 1997, 1998 Chevrolet S10
1983, 1984, 1985, 1986, 1987, 1988, 1989, 1990, 1991, 1992, 1993, 1994 Chevrolet S10 Blazer
1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001 Dodge Ram 1500
1972, 1973, 1974, 1975, 1976, 1977, 1978, 1979, 1980, 1981, 1982 Ford Courier
1991, 1992, 1993, 1994, 1995, 1996, 1997 Ford Explorer
1983, 1984, 1985, 1986, 1987, 1988, 1989, 1990, 1991, 1992, 1993, 1994, 1995, 1996, 1997 Ford Ranger
1999, 2000, 2001, 2002 Ford Ranger
1982, 1983, 1984, 1985, 1986, 1987, 1988, 1989, 1990 GMC S15
1983, 1984, 1985, 1986, 1987, 1988, 1989, 1990, 1991 GMC S15 Jimmy
1983, 1984, 1985, 1986, 1987, 1988, 1989, 1990, 1991 Jeep Cherokee
1976, 1977, 1978, 1979, 1980, 1981, 1982, 1983 Jeep CJ5
1976, 1977, 1978, 1979, 1980, 1981, 1982, 1983, 1984, 1985, 1986 Jeep CJ7
1986, 1987, 1988, 1989, 1990, 1991, 1992 Jeep Comanche
1967, 1968, 1969, 1970, 1971, 1972, 1973 Jeep Jeepster
1984, 1985, 1986, 1987, 1988, 1989, 1990 Jeep Wagoneer
1959, 1960, 1961, 1962, 1963, 1964, 1965, 1966, 1967, 1968, 1969, 1970, 1971, 1972, 1973, 1974 Land Rover Land Rover
1970, 1971, 1972, 1973, 1974 Land Rover Range Rover
1983, 1984 Mitsubishi Mighty Max
1986, 1987, 1988, 1989, 1990, 1991 Mitsubishi Montero
1968 Nissan 520 Pickup
1968, 1969, 1970, 1971, 1972 Nissan 521 Pickup
1972, 1973, 1974 Nissan 620 Pickup
1987, 1988, 1989, 1990, 1991, 1992, 1993, 1994, 1995, 1996, 1997 Nissan Pathfinder
1995, 1996, 1997 Nissan Pickup
1987, 1988, 1989 Toyota 4Runner
1970, 1971, 1972, 1973, 1974 Toyota Pickup
1987, 1988, 1989, 1990, 1991, 1992, 1993, 1994, 1995 Toyota Pickup

This is a short firm-riding AAL.

Includes Leaf Spring Center Pins.

 

8249

on

When you lift a 1995-2004 Tacoma or 2000-2006 Tundra, the Brake Proportioning Valve no longer senses loads properly and can cause a potentially dangerous braking situation.  This kit relocates the Brake Proportioning Valve to a higher position so it can properly sense the axle load and send the right amount of pressure to your brakes.  This kit can be used for rear lifts of 2” or 2-1/2” over stock.

**MADE IN THE USA**

Toyota Tacoma 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004

Toyota Tundra 2000, 2001, 2002, 2003, 2004, 2005, 2006

Part: 300737-1-KIT

Download Installation instructions 

3012

on

Urethane complete Rear Spring Bushing Kit for 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004 Toyota Tacoma 2WD/4WD

Part:  8.2108  8.2108G 8.2108R

For OEM factory leaf springs

Urethane Rear spring bushings fits Toyota Tacoma 1995.5, 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004

Kit includes All bushings for both rear springs including the upper frame bushings. Great for use with our 1″ and 2″ lift shackles.

Replaces factory rubber bushings with durable urethane bushings that will not seize and limit rear spring flex like stock bushings can.

Important Note: 6-lug only

4925

on

TAC 2304

Firestone Ride-Rite Air bags.

Ride-Rite air helper springs are the workhorse of Firestone’s air helper spring line. The double convoluted air springs offer maximum load capacity as well as years of worry-free service and support.

Ride-Rite air helper springs are installed between the frame of your vehicle and the suspension, providing load support by using air pressure.

Firestones air springs have become synonymous with quality, durability, and customer support that is second to none. Ride-Rite air bag kits utilize a pair of convoluted air springs which can be adjusted to accommodate your load capacity. The Ride-Rite series is capable of up to 5,000 lbs. of load level capacity. After installed, your ride will be enhanced by reducing inter-leaf friction which will keep your truck level, reduce suspension fatigue, and increase the stability of your Toyota vehicle.

Features:

  • Includes two (2) air springs
  • Easy Install – 1-2 hours
  • Load leveling capacity up to 5,000 lbs.
  • Keeps vehicle level
  • Level off-center or uneven loads
  • Reduce suspension fatigue
  • Improve the ride
  • Reduce bottoming out
  • Increase vehicle stability
  • Can be modified work with different lift amounts.  May require spacers.

Overall, Ride-Rite air bags have many advantages for your vehicle and will help to improve steering control and braking effectiveness, level headlight beams, reduce tire wear, keep leaf springs from permanent sagging, reduce bottoming out with air cushions between the axle and frame, absorb road shock, and match your vehicles load for an overall improved ride.

NOTE: Custom modifications to mounting brackets may be required for lifted applications to ensure air bags are properly supported.

4641