Generic filters
Exact matches only
Archives

on

OME bracket kit for lowering exhaust mount for rear springs clearance on 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004 Toyota Tacoma

FK21

  • This bracket kit is designed to lower the mounting position of the exhaust to provide proper clearance when installing the Old Man Emu Dakar Leaf Springs or longer shackles
  • Kit includes bracket and hardware.
  • Fits 95.5-04 Tacoma
4907

on

OME CS019R
Fits Toyota Tacoma 1995.5, 1996, 1997 Only!

(Not recommended for single cab models)

****PRICED PER SET**

3″-3.25″ Rear llift. *May remove 3rd Leaf from top for ligher duty or lower lift height*
Complete rear springs priced each with bushings.
*May require new U bolts, order separately.

** Rear Tailpipe relocation required **

OME Dakar leaf springs feature:

  • Draw Tapered & Diamond Cut Leaves: Ensure the load is progressively distributed over a larger surface area, reducing the high stresses that develop at leaf ends. This provides increased ride quality and protection against leaf breakage, significantly increasing the spring life.
  • Bolt Clamps & Liners: The leaf clamps are bolted to allow installation of anti squeak nylon liners.
  • Fully Scragged & Load Tested: Scragging ensures the spring takes a permanent ‘set’ which reduces the risk of sagging. Load testing ensures the spring meets the required specification.
  • Graphite Coating: To further reduce the friction between the spring leaves & friction pads.
  • Military Wrap: Designed to provide added safety.
  • Anti Friction Pads: Regreasable nylon interleaf liners reduce friction at the leaf tips where the load is the greatest.
  • Flat Axle Seat Area: Allows a positive, safe axle mount reducing spring stress & increasing spring life.
  • Shot Peening: The tension side of all leaves is shot peened to reduce spring stress. This process can double the life of a spring.
  • Two-stage Leaf Pack: Featured on most rear springs for optimum comfort. When unladen the vehicle is largely riding on the primary stage, with the secondary stage providing additional support when a heavy load is added.

Please note: Most Emu Dakar leaf springs have all the listed features, but where design or a physical limitation exists one or more of these features may not be incorporated. Please check with your OME licensed fitter for further information.

PRICED per 2 Springs

8600

on

OME 2.5″ Rear Lift Springs for 1998, 1999, 2000, 2001, 2002, 2003, 2004 Toyota Tacoma includes bushings

Part: EL122RAB (old:CS046RAB)

Includes:

  • Springs (2 – left and right)
  • Bushings (2 sets) OMESB121 (older bushings style wont work!)

 

May require new U bolts, order separately.

Part number FK21 is usually required for Tailpipe relocation, order separately:

You might also be interested in:

OME Dakar leaf springs feature:

  • Draw Tapered & Diamond Cut Leaves: Ensure the load is progressively distributed over a larger surface area, reducing the high stresses that develop at leaf ends. This provides increased ride quality and protection against leaf breakage, significantly increasing the spring life.
  • Bolt Clamps & Liners: The leaf clamps are bolted to allow installation of anti squeak nylon liners.
  • Fully Scragged & Load Tested: Scragging ensures the spring takes a permanent ‘set’ which reduces the risk of sagging. Load testing ensures the spring meets the required specification.
  • Graphite Coating: To further reduce the friction between the spring leaves & friction pads.
  • Military Wrap: Designed to provide added safety.
  • Anti Friction Pads: Regreasable nylon interleaf liners reduce friction at the leaf tips where the load is the greatest.
  • Flat Axle Seat Area: Allows a positive, safe axle mount reducing spring stress & increasing spring life.
  • Shot Peening: The tension side of all leaves is shot peened to reduce spring stress. This process can double the life of a spring.
  • Two-stage Leaf Pack: Featured on most rear springs for optimum comfort. When unladen the vehicle is largely riding on the primary stage, with the secondary stage providing additional support when a heavy load is added.

Please note: Most Emu Dakar leaf springs have all the listed features, but where design or a physical limitation exists one or more of these features may not be incorporated. Please check with your OME licensed fitter for further information.

Download OME CS046R Installation Instructions

20740

on

Front OME Coils  for 1995-2004 Tacoma and 1996, 1997, 1998, 1999, 2000, 2001, 2002 4Runner

Part: OME-***

As part of their integrated 4WD suspension systems, Old Man Emu designs a range of coil springs for each vehicle, enabling the installer to match the most appropriate springs to the intended application. While ride height increases are attained, emphasis is placed on ride control improvements. Further fine tuning is achieved when the springs are matched to a corresponding set of Old Man Emu shock absorbers, delivering a fully integrated system designed specifically to suit your vehicle.

  • Springs are formed on precision mandrels
  • Scragging before and after shot peening to prevent sagging
  • Coil spring end configurations designed to exact specifications guaranteeing perfect fitment to your vehicle
  • Durable powder coat finish

Front coils: Choose one option in dropdown

  • OME 2880: Stock front weight.1.5 inch lift.
  • OME 2881: Stock front weight. 2-2.5 inch lift.
  • OME 2883: 200 + lbs additional front weight (heavy bumper and winch) 2.5- 3 inch Lift

 

**2wd Prerunner lift heights may vary.  2881 and 2883 coils are not recommend for 2wd without additional weight.

NOTE: 2883 coils require matching OME 90004 front shocks

Sold in pairs.

Will not work on a 5-lug Tacoma.

Want a full lift kit?

58817