ARB Leaf Springs for 1980-1998 Nissan Patrol

• Draw Tapered And Diamond Cut Leaves: Ensure The Load Is Progressively Distributed Over A Larger Surface Area, Reducing The High Stresses That Develop At Leaf Ends
• Fully Scragged And Load Tested: Scragging Ensures The Spring Takes A Permanent ‘Set’ Which Reduces The Risk Of Sagging
• Graphite Coating: To Further Reduce The Friction Between The Spring Leaves And Friction Pads
• Military Wrap: Designed To Provide Added Safety
• Anti Friction Pads: Regreasable Nylon Interleaf Liners Reduce Friction At The Leaf Tips Where The Load Is The Greatest
• Flat Axle Seat Area: Allows A Positive, Safe Axle Mount Reducing Spring Stress And Increasing Spring Life
• Shot Peening: The Tension Side Of All Leaves Is Shot Peened To Reduce Spring Stress, This Process Can Double The Life Of A Spring
• Limited 3 Year Or 60,000 Kilometer Warranty

Fits:

• (1988-1998) PATROL GQ Y60 UTE & CAB CHASSIS LEAF SPRING MODELS (4.2 ENGINE)
  (CBS02 x 2 centre bolt spacers required for front spring fitment.)
  FRONT Estimated Lift: 1.2 inch
• (1980-1989) LANDCRUISER 60, 61 & 62 SERIES  (Petrol Engine)
  (Front bump stop measurement must not exceed 100mm to ensure good shackle angle. To reduce bump stop gap, remove the 4th leaf from the top of the spring. OMECW2 Caster Wedge Kit may be required to restore correct caster angle.)
  (Shackles: FK08 Anti Inversion Kit is mandatory fitment if greasable shackles are not fitted. Refer OME Technical & Fitting Manual.)
  (D1XL only suitable for CS003F & CS004F.)
  FRONT Estimated Lift: 2 inch