Your cart is currently empty!
Bilstein 6112 0-2.75″ Front Lift kit and shocks 2011-2018 Ram 1500 4WD
Description
Bilstein 6112 0-2.75″ Front Lift kit and shocks 2011-2018 Ram 1500 4WD
Bilstein 6112 0-2.75″ Front Lift and 5100 0-1″ Rear lift Shock Coil Kit for 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018 Ram 1500 4WD
Part: 47-311015_2x24-187374
Need it assembled?
Bilstein 6112 0-2.75″ Front Lift Assembled Coilovers, 5100 0-1″ Rear Lift Shocks for 2011-2018 Ram 1500 4WD
(1 review)Original price was: $1,269.49.$1,156.95Current price is: $1,156.95.
Includes: Front 6112 kit (Front shocks & front coils), Rear Bilstein 5100 Shocks
Front kit(47-311015):
Bilstein B8 6112 leveling kits are designed to provide more ground clearance, allow for larger tires, and increase wheel travel. Multiple snap-ring grooves in the body allow for different spring seat positions, providing 0-2.75 inches of front lift (depending on application). These kits consist of (2) 60mm shock absorbers combined with (2) custom matched cold wound coil springs and (2) billet aluminum spring seats. The large 60mm digressive piston allows for increased damping control for optimal on-road and off-road capabilities. Experience the legendary Bilstein off-road experience with the best direct fit spring and shock kit for your light truck or SUV.
Rear Shocks (24-187374):
Bilstein B8 5100 shock absorbers are designed as a direct fit solution for lifted trucks and SUV’s. These shock absorbers feature a monotube design which provides consistent fade free performance. B8 5100 shock absorbers utilize a unique, velocity sensitive, digressive piston which reacts to changing road conditions. All B8 5100 shock absorbers are tuned for each specific application to assure optimal performance is achieved. B8 5100 shock absorbers offer a significant improvement in ride quality, handling, and comfort.
- Collapsed Length (IN) 16.75
- Extended Length (IN) 26.73
- Collapsed Length (MM) 425.5
- Extended Length (MM) 679.0
- Finish Zinc Plated
- Reservoir No
- Body Design Smooth Body (Non-Coilover)
- Body Diameter 46mm
- Spring Seat Included No
- Adjustable Damping Non-Adjustable
Questions and answers of the customers
-
Does the front shocks level the truck?
- A Yes they do levelIs this the correct rear coil spring to go with this kit Part: 36-286539? I see two different rear coil springs listed under your parts inventory.
- QIs this the correct rear coil spring to go with this kit Part: 36-286539? I see two different rea...... Read more answer nowA https://www.suspensionlifts.com/shop/dodge/09-12-dodge-ram-1500/2009-2010/rear-lifts-2009-2010/bilstein-b12-1-5-rear-lift-coils-for-2009-2019-ram-1500/ yes, it will be goodIt's this the same as a 2.5 in leveling kit
- A 6112 shocks have thicker shock bodyWith this leveling kit, what about the rear springs?
- QWith this leveling kit, what about the rear springs?There are no answers for this question yet. Answer nowHello. I wanted to know if I run this Bilstein set up on my 2015 Ram crew cab 4x4. Would I be able to run 20x12 wheels w 35x12.5 tires? Rub? Additional lift req? Recommendations?
- QHello. I wanted to know if I run this Bilstein set up on my 2015 Ram crew cab 4x4. Would I be abl...... Read more answer nowA Oh yeah it will i ride on 5100s very smooth but turning my wheels does rub slightly theyre 33x12.50x22. Youll definetely will need a lift maybe a 4 inch otherwise your tires will definetely will get shred like cheese.With this kit on a 2016 Ram 1500 4*4 will 22*12 -44 offset with 33*12.5 tires fit without any rub?
- QWith this kit on a 2016 Ram 1500 4*4 will 22*12 -44 offset with 33*12.5 tires fit without any rub?answer nowA Maximum that you can use with this kit Rim* - 8" Tire Width* - 11.5" Tire* - 33" Backspace - 5.5"Will these work with existing 3” lift on ram1500 4wd 2016?
- A Front shocks and springs are able to lift the front up to 2.75'' by themselvesRears will fit 0-1'' liftRecommendations for upper control arm with this kit?
- A Hello UCAs are always not a bad idea, but the lifts up to 3'' can go without UCAs. We can offer https://www.suspensionlifts.com/shop/dodge/09-12-dodge-ram-1500/2009-2010/upper-control-arms/icon-uniball-upper-control-arm-kit-2009-2017-dodge-ram-1500/https://www.suspensionlifts.com/shop/dodge/09-12-dodge-ram-1500/2009-2010/upper-control-arms/icon-tubular-ucas-delta-joint-2009-2018-dodge-ram-1500/Is it recommended to get steering stabilizers or tie rods or anything else to beef up the front end before getting these?
- QIs it recommended to get steering stabilizers or tie rods or anything else to beef up the front e...... Read more answer nowA Hello This kit will be enough Position:Front Notes:-Front Lift Height: 0-2.6"Position:Rear Notes:-For Rear Lifted Height: 0-1" Without Air SuspensionCan these replace my rough country struts and shocks on a 6 inch lift?
- A it is not recommended to stack lifts, if you use stock height shocks now you may try using these on the lowest notch adjustmentI currently have a 2 inch leveling spacer kit on my 16 ram 1500. When I pull a trailer of any weight my back end squats, and the front end comes up terribly. Will this kit address this issue?
- QI currently have a 2 inch leveling spacer kit on my 16 ram 1500. When I pull a trailer of any wei...... Read moreThere are no answers for this question yet. Answer nowWill this lift work for a 2015 eco diesel 4x4?
- A Yes, it will fit 2015 Ram 1500 4WD EcoDisel with coil spring suspensionWill this increase wheel travel?
- A Yes, these shocks are longer then stock.Rears can handle up to 1'' rear liftWill the bilstein 6112 work on 2013 ram 2wd
- A Unfortunately no, these are for 4WDDo the struts come already lifted to 2-3/4 or do they come at stock height and need adjusted to the full lift?
- QDo the struts come already lifted to 2-3/4 or do they come at stock height and need adjusted to t...... Read more answer nowA The item comes not assembledWill i need a brake line extension.
And what about stabilizer link.. should i get longer ones.
- QWill i need a brake line extension. And what about stabilizer link.. should i get longer ones.answer nowA No, can go with stock lengthDo you use the stock cap for the top?
- A You may reuse your oldA YesIs the coil any differnt than a stock coil on the Ram 1500?
- A Coils are longer, providing additional liftDoes this keep the correct geometry on the upper control arm or do I need to worry about that failing down the road?
- QDoes this keep the correct geometry on the upper control arm or do I need to worry about that fai...... Read more answer nowA No need to worry, it's designed to fit the stock suspension parts.UCA's are recommended but not require, the benefit of the UCA's is to fix the caster when the vehicle is getting aligned and also helps you a lot with articulation on the front end.Is this a direct bolt on? Will I need any supporting mods to make these work on my truck?
- QIs this a direct bolt on? Will I need any supporting mods to make these work on my truck?answer nowA You would need a coil spring compressor for theseA You would need a coil spring compressor for installation. They can work as is, front height is adjustable (Adjustment Range: 0 To 2-3/4 Inch Front) , as for the rear - the rear shocks will not give you any lift by themselves but can work with existing 1'' lift
4 reviews for Bilstein 6112 0-2.75″ Front Lift kit and shocks 2011-2018 Ram 1500 4WD