Your cart is currently empty!
- Cannot contact the gateway at this time.
ICON 0-3.5″ Lift Kit Stage 1 for 2003-2009 Toyota 4Runner, 2007-2009 FJ Cruiser
Description
ICON 0-3.5″ Lift Kit Stage 1 for 2003-2009 Toyota 4Runner, 2007-2009 FJ Cruiser
ICON 0-3.5″ Lift Kit Stage 1 for 2003, 2004, 2005, 2006, 2007, 2008, 2009 Toyota 4Runner, 2007, 2008, 2009 FJ Cruiser
Part: K53051
OVERVIEW:
This is our entry level suspension system for the 2003-2009 Toyota 4Runner. The Stage 1 system works well in most on and off-road scenarios by significantly improving factory body roll and overall driving ability. ICON 2.5 Series front coilover shocks feature a vehicle-specific tune to give your Toyota 4Runner great ride quality on or off-road, and they are adjustable from 0 to 3.5″ of lift. Our rear 2.0 Aluminum Series shocks in this system are tuned to match the front 2.5 Series coilovers in every aspect, providing smooth and consistent damping performance front to rear. This system is finished off with a pair of 2″ lift rear coil springs that have been engineered to further improve ride quality and handling.
TECH INFO:
- We recommend the use of our #56100 shock shin guards to reduce the chance of shock shaft damage. These shocks are located in a vulnerable position that allows debris to easily come in direct contact with the shock shaft.
OEM Wheels & Tires: Yes
Aftermarket Wheels: 8-8.5″ Wide, 4.75″ Backspace
Aftermarket Tires: 33″ x 11.25
(Larger tires may fit but fender trimming and modifications will be required)
SYSTEM COMPONENTS:
58640 (QTY.1) | 03-09 4RUNNER 2.5 SERIES IR COILOVER KIT
52700 (QTY.1) | 07-UP FJ/03-UP 4RUNNER REAR 2″ SPRING KIT
56505 (QTY.2) | 03-UP 4 RUNNER 1-3″ REAR 2.0 ALUMINUM SERIES IR SHOCK
OPTIONS:
58451DJ | Tubular Delta Joint upper control arms
58551DJ | Billet Delta Joint upper control arms
56100 | ICON Rear shock shin guards
54000 | Billet lower adjustable link arms
54100 | Billet upper adjustable link arms
54200 | Adjustable track bar
52800 | ICON Overland Series dual rate 3″ lift rear coil springs
56104 | Rear hydraulic bumpstop kit
191011 | ICON tubular upper control arm cover caps
198000 | ICON 2 pin spanner wrench
Questions and answers of the customers
-
can you get 3.5" of front lift with the icon kit
- A Yes on the front. You would need Spanner Wrench to adjustDo I need to buy a lift kit also with these?
- A Diff drop kt is recommended for 4WD trucks for 1.5'' of front lift and more to increase the CV axles life.https://suspensionlifts.com/shop/toyota-tacoma/2005-2015/front-differential-drop-kit/
Add a review