Your cart is currently empty!
Long Travel 2.5-4″ Bilstein 5100 Rear Shocks 1996-2002 Toyota 4Runner
Sale!
Description
Long Travel 2.5-4″ Bilstein 5100 Rear Shocks 1996-2002 Toyota 4Runner
Long Travel Bilstein 5100 Rear Shocks for 1996, 1997, 1998, 1999, 2000, 2001, 2002 Toyota 4Runner
Part: 9602E703
Includes: 2 Shocks (Qty 2 of 33-313146 (old: 33-187174) )
Extended Length: 23.5″
Compressed Length: 14.91″
Rod Diameter: 1.81″
Upper Mounting Style: Stem
Lower Mounting Style: Eyelet
These are long travel rear Bilstein 5100 series shocks outfitted to work with your 3rd Gen 4Runner and should only be used with long rear lift coil springs.
If NOT used with coil springs at least as 2.5-4″ long a coils, you will need to hard mount your internal spring bump stops, mount your rear springs to the axle perch, and extend the axle bumps. There is a high possibility of spitting a spring at full droop if you use too short of a coil spring in back.
We still advise checking full compression and droop after install to determine if your 4Runner needs to be bump stopped or if any other mods need to be made to any ABS or brake lines.
The installation of a longer rear brake line is required with these rear shocks.
Includes 2 Shocks
Questions and answers of the customers
-
Will these work on an 02 Toyota sequoia with a 2 inch rear lift?
- QWill these work on an 02 Toyota sequoia with a 2 inch rear lift?There are no answers for this question yet. Answer nowwhats the difference between these 5100 vs 5100 land cruiser 80?
- A dampingwhat year and generation is your LandCruiser?Will these work on a 2011 4runner with a 3in lift?
- A you need thosehttps://www.suspensionlifts.com/shop/lexus/gx460/shocks-gx460/icon-rear-shocks-1-3-inch-lift/https://www.suspensionlifts.com/shop/toyota-4runner/03-09-4runner/03-09-4runner-shocks/fox-2-0-rear-2-3-inch-lift-shocks-for-toyota-fj-cruiser-4runner/How much should I extend my break lines by? 5 inches?
- A up to 3'' lift OEM brake lines are goodI have a 2001 (1st gen) Tacoma. Will these work with old man emu 2.5-3" lift springs in the rear?
- QI have a 2001 (1st gen) Tacoma. Will these work with old man emu 2.5-3" lift springs in the rear?answer nowA yes, it will workWill these work with arb 2891 spring?
- A Better for this spring https://www.suspensionlifts.com/shop/toyota-4runner/1996-2002/rear-lifts-96-02-toyota-4runner/rear-ome-891-coils-for-1996-2002-toyota-4runner/ use these shocks https://www.suspensionlifts.com/shop/toyota-4runner/1996-2002/shocks-96-02-toyota-4runner/bilstein-0-2-rear-lift-shocks-1996-2002-toyota-4runner/ The ones you speak of are too long for this springWill these shocks work with OME 890 rear coil springs? 2002 4runner.
- A yes, they will work with 3'' rear coilsWill these work with OME 861 on a 3rd gen 4runner
- A yes if you have 3-4'' rear liftWhat bushing kit do I get to replace the top bushings? I have a 2001 4runner 4WD SR5 with Toytec Super Flex 024RCB coils
- QWhat bushing kit do I get to replace the top bushings? I have a 2001 4runner 4WD SR5 with Toytec ...... Read moreThere are no answers for this question yet. Answer nowWill they work on my 1999 pathfinder with 2.5" spacer lift
- A unfortunately no for pathfinderWill these work on a 2005 4runner with a 3" lift?
- QWill these work on a 2005 4runner with a 3" lift?There are no answers for this question yet. Answer nowwill these work on a 1990 4 runner with 2.5 inch lift?
- A for 1990 we can offerhttps://www.suspensionlifts.com/shop/toyota-4runner/90-95-toyota-4runner/90-95-toyota-4runner-2wd4wd-3-4-front-3-4-rear-lift-skyjacker-shocks/Are these the same shocks that are in the Toyota FJ Cruiser 2 inch lift rear rear b8 5100?
- QAre these the same shocks that are in the Toyota FJ Cruiser 2 inch lift rear rear b8 5100?answer nowA please send us complete info about your truck as follows:Year Model Sub-model (1500 / 1500HD / etc. ) Drive train (4WD / 2WD) Engine (volume, fuel:gas/diesel) Cab (regular, crew, extended) Lift height ( front and rear lift amount if applicable ) Lift type (spacers, spring coils or specify if anything else was applied for the lift)and we'll try our best to find the proper shocks for your vehicleWill these work on a 2in lift coil spacer for the rear if I leave the shock at the 2.5 setting
- QWill these work on a 2in lift coil spacer for the rear if I leave the shock at the 2.5 settinganswer nowA I think it can work with 2'' rear spacer without heavy rear loads, but it will be better to use it with 2,5'' rear lift and moreMy 98 4runner has a 3inch rough country lift on it atm. Would these would with my rough country lifted coil springs?
- QMy 98 4runner has a 3inch rough country lift on it atm. Would these would with my rough country l...... Read more answer nowA Yes if you have rear 3'' liftCan I adjust them to fit my ome 890x? iv seen post that say the ome 890 are only 2.5” And other post saying 3”!
- QCan I adjust them to fit my ome 890x? iv seen post that say the ome 890 are only 2.5” And other p...... Read more answer nowA Shocks are not height adjustable they are just longer then stock will fit from 2,5'' to 4'' rear liftIs this the Bilstein 4R5100?
- A It's 5100 series BilsteinI’m getting some LC 8 wraps for my 98 4runner. Will these work with tabloids coils?
- A Those* instead of tabloidsA These shocks are:Extended Length (IN): 23-1/2 Inch Compressed Length (IN): 14.91 Inch Rod Diameter (IN): 1.81 Inch Upper Mounting Style: Stem Lower Mounting Style: EyeletPlease compare to your old shocks dimensions and mountings (especially collapsed lenght).No less then 2,5'' rear lift is needed for these shocksim running rear stock lc coils in my 97 4runner, would this fit?
- A For long travel shocks you need to use at least 2,5'' lift coils or higherHi! I‘m having a hard time finding these shocks in Germany. Any chance you could ship overseas? Thx
- QHi! I‘m having a hard time finding these shocks in Germany. Any chance you could ship overseas? T...... Read more answer nowA Please specify your full postal addressIs this product priced as a set or each individually?
- A
Priced per set.
Hi - Will these work with OME 890 rear springs? Or, should I just get the regular Bilstein 5100 shocks? - QHi - Will these work with OME 890 rear springs? Or, should I just get the regular Bilstein 5100 s...... Read more answer nowA Yes, it will work for 3'' rear liftWill these work on a stock height 4Runner?
- A No, needs minimum 2,5'' lift or moreI have 3" toytec lift springs in the rear of my 1998 4runner. Should I use these or just the 2.5" bilstein 5100 lift shocks?
- QI have 3" toytec lift springs in the rear of my 1998 4runner. Should I use these or just the 2.5"...... Read more answer nowA These shocks will be good for 3'' liftAre these the same shocks that fit a 1st generation Land Cruiser?
- A No, these shocks are: Extended Length (IN): 23-1/2 Inch Compressed Length (IN): 14.91 Inch Rod Diameter (IN): 1.81 Inch Upper Mounting Style: Stem Lower Mounting Style: Eyeletwill fit 2010-2017 Toyota 4Runner 2010-2014 Toyota FJ CruiserWill this work on a 1997 2WD V6 SR5 model?
- A Yes, 1996-2001 are the same style 4runners. Should work regardless of 4wd or not.Does this work on 1999 4Runner 2wd?
- A YesA Yes. Please take measurements of your shocks and compare to these:Collapsed Length (IN): 14.91 Extended Length (IN): 23.5to be sure
ATTENTION STATE OF CALIFORNIA CONSUMERS. WARNING: Cancer and reproductive harm – www.p65warnings.ca.gov
Related products
- Sale!
Bilstein 5100 0-2.3″ Lift Front, Rear Shocks for 1996-2002 Toyota 4Runner
(13 reviews)Original price was: $534.00.$470.89Current price is: $470.89. - Sale!
OME 0-1″ Lift Front 90004 Shocks for 1995-2004 Toyota Tacoma, 1996-2002 4Runner
(0 reviews)Original price was: $400.19.$354.00Current price is: $354.00.
10 reviews for Long Travel 2.5-4″ Bilstein 5100 Rear Shocks 1996-2002 Toyota 4Runner