OME 2″ Lift with 661LB weight Rear Springs for 2005-2023 Toyota Tacoma

SKU: 2xEL096R_2xOMESB108
1 out of 5 based on 1 customer rating
(1 customer review)

Description
OME 2″ Lift with 661LB weight Rear Springs for 2005-2023 Toyota Tacoma

OME 2″ Lift with Constant 300KG / 661LB weight HD (Heavy Duty) Rear Springs for 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018, 2019, 2020, 2021, 2022, 2023, 2023 Toyota Tacoma

Part: 2xEL112R_2xOMESB108

2″ lift complete rear Old Man Emu Dakar springs priced as a pair (2), with bushings (OMESB108  x 2).
**Also requires new longer rear U-bolts, not included

OME Dakar leaf springs feature:

  • Draw Tapered & Diamond Cut Leaves: Ensure the load is progressively distributed over a larger surface area, reducing the high stresses that develop at leaf ends. This provides increased ride quality and protection against leaf breakage, significantly increasing the spring life.
  • Bolt Clamps & Liners: The leaf clamps are bolted to allow installation of anti squeak nylon liners.
  • Fully Scragged & Load Tested: Scragging ensures the spring takes a permanent ‘set’ which reduces the risk of sagging. Load testing ensures the spring meets the required specification.
  • Graphite Coating: To further reduce the friction between the spring leaves & friction pads.
  • Military Wrap: Designed to provide added safety.
  • Anti Friction Pads: Regreasable nylon interleaf liners reduce friction at the leaf tips where the load is the greatest.
  • Flat Axle Seat Area: Allows a positive, safe axle mount reducing spring stress & increasing spring life.
  • Shot Peening: The tension side of all leaves is shot peened to reduce spring stress. This process can double the life of a spring.
  • Two-stage Leaf Pack: Featured on most rear springs for optimum comfort. When unladen the vehicle is largely riding on the primary stage, with the secondary stage providing additional support when a heavy load is added.

Please note: Most Emu Dakar leaf springs have all the listed features, but where design or a physical limitation exists one or more of these features may not be incorporated.

Customer reviews

Rated 1 out of 5 stars
1 review
5 stars 0 0 %
4 stars 0 0 %
3 stars 0 0 %
2 stars 0 0 %

1 review for OME 2″ Lift with 661LB weight Rear Springs for 2005-2023 Toyota Tacoma

    Add a review

    Use one of the allowed file type: jpg,png,jpeg.

      Questions and answers of the customers

        Could I use a U bolt flip kit with the OME expedition leaf springs on a tacoma?
      1. 0 votes
        QCould I use a U bolt flip kit with the OME expedition leaf springs on a tacoma?answer now
        A Yes you could no problem
      2. If I want to make this go back down to handle 0lbs/stock weight, which leaf(s) do I need to remove?
      3. 0 votes
        QIf I want to make this go back down to handle 0lbs/stock weight, which leaf(s) do I need to remove?answer now
        A unfortunately, these springs will not give stock height ( 0'' lift)
      4. Do I need to replace shackles to Install these springs
      5. 0 votes
        QDo I need to replace shackles to Install these springsanswer now
        A You can use your shackles
      6. What is max load wieght for the leaf spring. I have the 661 # in the bed of my truck. How much more can I put in my bed and or tongue wieght.
      7. 0 votes
        QWhat is max load wieght for the leaf spring. I have the 661 # in the bed of my truck. How much mo...... Read more answer now
        A These leaf springs are designed for Constant 300KG / 661LB weight, if you want more weight in the back I would recommend air bags
      8. What are the matching shocks for a 2019 Tacoma?
      9. 0 votes
        QWhat are the matching shocks for a 2019 Tacoma?answer now
        A There are no exact matches for these springs however, I've seen a lot of people pairing the Bilstein 5160 series reservoir shock absorbers - 25-242379 with this leaf pack.
      10. would this package be good for truck bed cap and off road heavy duty bumper and tire carrier along with a rood top tent on the truck cap
      11. 0 votes
        Qwould this package be good for truck bed cap and off road heavy duty bumper and tire carrier alon...... Read more answer now
        A The springs are rated for a constant load of 661lbs. I would assume the modifications you mentioned, probably weigh between 400-600 lbs. In my opinion these would be Ideal for your truck since we all know you will have other gear in the truck as well. However, your best bet is to figure out the weight of all your mods. then go from there.
      12. can you add a leaf to increases load strength.
      13. 0 votes
        Qcan you add a leaf to increases load strength.answer now
        A These leaf springs are for 661LB
      14. Will these add 661 lbs. to my payload capacity?
      15. 0 votes
        QWill these add 661 lbs. to my payload capacity?answer now
        A These springs are for constant 661 lbs load carried, they will be too stiff for empty truck
        A I have a camper shell on my 4 door Tacoma . Will that be enough weight or they still be stiff?
      16. Does this package fix the Tacoma Lean in the rear end? I have a 0.5 difference between the right side and the left side.
      17. 0 votes
        QDoes this package fix the Tacoma Lean in the rear end? I have a 0.5 difference between the right ...... Read more answer now
        A The springs are equal, but as they are stronger then stock the lead will definitely be more or less compensated depending on wehicle peculiar properties. It is recommended heavier items to the side which is opposite to the lean

      Send me a notification for each new answer.

      -

      $749.00

      More than 30 available

      More than 30 available

      1-3 Day Transit Time