Eibach 2″ Front Pro-Lift Coil Springs for 2007-2015 Toyota Tundra 4WD

SKU: E30-82-067-03-20
Eibach 2" Front Pro-Lift Coil Springs for 2007-2015 Toyota Tundra
Eibach 2" Front Pro-Lift Coil Springs for 2007-2015 Toyota Tundra

Description
Eibach 2″ Front Pro-Lift Coil Springs for 2007-2015 Toyota Tundra 4WD

Eibach 2″ Front Pro-Lift Coil Springs for 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015 Toyota Tundra 4WD

Part: E30-82-067-03-20

Engineered with the same technology, craftsmanship and world-class materials that make Eibach springs and other suspension components the choice of champions in NASCAR, SCORE, CORR, the World Rally Championship, and even Formula 1.

Designed to increase ground clearance, for better off-road clearance and performance. The added suspension travel delivers a more responsive, more controlled ride over rough terrain, and gives you the additional wheel-well clearance to use bigger, higher-performance off-road wheels and tires.

  • For use with Eibach Pro-Sport Leveling Shocks  (Not for use with stock shocks)
  • Provides approximately 2″ of lift on the bottom clip setting and 3″ of lift on the 2nd clip setting.
  • Designed for 07+ Tundra’s
  • Sold as a pair, (2) front coils
*Note:  Average lift measurements shown are for Pro Truck Sport Dampers when used in conjunction with Eibach Pro Lift Springs.  The lift amounts are based on a stock vehicle with no added aftermarket accessories or additional weight.

Customer reviews

Reviews

There are no reviews yet.

Be the first to review “Eibach 2″ Front Pro-Lift Coil Springs for 2007-2015 Toyota Tundra 4WD”

Use one of the allowed file type: jpg,png,jpeg.

    Questions and answers of the customers

      Which Diff Drop kit would I use with these?
    1. 0 votes
      QWhich Diff Drop kit would I use with these?answer now
      A Diff drop kit is recommended for 4WD trucks for 1.5'' of front  lift and more to increase the CV axles life.
      2. Can I use this eibach springs on my bilstein 5100 B8 shocks and if so what height will I achieve in the first and middle settings. FYI my lowest setting is 0.87inches
    2. 0 votes
      QCan I use this eibach springs on my bilstein 5100 B8 shocks and if so what height will I achieve ...... Read more answer now
      A You'll get 2.5'' on the lowest and 3.2'' on the 2nd
      A If I use the middle setting would I need an aftermarket upper control arm?
      3. How long are the coil springs? I get they give you two inches but I'd like to know the total length.
    3. 0 votes
      QHow long are the coil springs? I get they give you two inches but I'd like to know the total length.
      There are no answers for this question yet. Answer now
      4. I have a 2008 tundra with a 6" lift, i installed the rough country shocks 3 inch bore to fit with out the spacers. But know my truck is sitting low in the front instead of level. My question is do u think these will help me level out my truck, it's only about 1 1/2 to 2 inches lower.
    4. 0 votes
      QI have a 2008 tundra with a 6" lift, i installed the rough country shocks 3 inch bore to fit with...... Read more answer now
      A It is not recommended to stack lifts, can't be sure your shocks and suspension arms will have enough length
      5. Will these fit on my 2008 Tundra 4wd with the TRD off-road package? If not what will? Thanks
    5. 0 votes
      QWill these fit on my 2008 Tundra 4wd with the TRD off-road package? If not what will? Thanksanswer now
      A Yes, it will fit. Longer shocks will be needed such as * * * https://www.suspensionlifts.com/shop/toyota-sequoia/bilstein-5100-height-adjustable-front-shocks/
      6. I have a 2017 Toyota Tundra Crewmax SR5 RWD 5.7L. Can I use these coil springs with the Bilstein 5100 adjustable front shocks set at the lowest .87” setting with a .25” lift shim for an additional .50” to achieve approximately 2.75” of lift?
    6. 0 votes
      QI have a 2017 Toyota Tundra Crewmax SR5 RWD 5.7L. Can I use these coil springs with the Bilstein ...... Read more answer now
      A Yes, you can do it.Maybe you'll get 2.75'' even without shims - just with coils and shocks
      7. I have a 2008 Tundra 2wd, and just bought Bilstein 5100s, if I set the circlip at the 2nd groove (1.57) inches and use these coils will I get 3in lift. I know doing the math will be 3.57, but I'm guessing there will be some settling?
    7. 0 votes
      QI have a 2008 Tundra 2wd, and just bought Bilstein 5100s, if I set the circlip at the 2nd groove ...... Read more answer now
      A Setting at 2nd clip will give you about 3'' of lift. Please do not set it higher in order not to damage the suspension
      8. What is the spring rate?
    8. 0 votes
      QWhat is the spring rate?answer now
      A The spring rate is about 700 lbs
      9. So are these usable on bilstein 5100's? If so what would the height difference be with these springs?
    9. 0 votes
      QSo are these usable on bilstein 5100's? If so what would the height difference be with these spri...... Read more answer now
      A They are useable, but5100s will be needed to be set on the lowest notch.These coils will give 2'' of lift on the lowest notch, and setting higher may give you more then 2'' of lift that can damage suspension
      10. Can you use these springs with Bilstein 5100 skocks
    10. 0 votes
      QCan you use these springs with Bilstein 5100 skocksanswer now
      A Can be used on 1st or 2nd notch adjustment - not higher. Provides approximately 2″ of lift on the bottom clip setting and 3″ of lift on the 2nd clip setting.

    Send me a notification for each new answer.

    You may also like…

    ATTENTION STATE OF CALIFORNIA CONSUMERS. WARNING: Cancer and reproductive harm – www.p65warnings.ca.gov

    Related products

    -

    $225.00

    4 left in stock

    4 left in stock

    2-5 Day Transit Time

    Share (0)
    Total: 0 Total: 0 Total: 0 Total: 0