Bilstein 5100 0-2.5″ Lift Front Adjustable Shocks for 2000-2006 Toyota Tundra

SKU: B-6929
4.1666666666667 out of 5 based on 6 customer ratings
(6 customer reviews)
Sale!
Bilstein Front adjustable 5100 shocks for 2000-2006 Toyota Tundra 24-261425
Bilstein Front adjustable 5100 shocks for 2000-2006 Toyota Tundra 24-261425

Description
Bilstein 5100 0-2.5″ Lift Front Adjustable Shocks for 2000-2006 Toyota Tundra

Bilstein Front Height Adjustable 5100 shocks for 2000, 2001, 2002, 2003, 2004, 2005, 2006 Toyota Tundra

Part: 24-261425 (old: 24-188265)

Includes: 2 Shocks 24-261425 (old: 24-188265)

Front 5100 Height adjustable front shocks provide various lift:

width=
Typical Front Lift Height**
circlip
location #		crew cab
4×4		access cab
4×4		crew cab
4×2		access cab
4×2
1stockstockstockstock
20.53″0.53″0.63″0.66″
31.07″1.05″1.25″1.33″
41.6″Do NOT use1.88″2.00″
5Do NOT useDo NOT use2.50″2.65″

On Crew Cab 4×4 models, do not use circlip location #5.
On Access Cab 4×4 models, do not use circlip locations #4 or #5.

** Ride heights indicated are typical. Actual ride height is influenced by which factory suspension the vehicle is equipped with and its condition; optional equipment and accessories on your vehicle, and other vehicle modifications such as replacement coil springs, wheel and tire combinations, etc. Modifying/lifting the suspension to your vehicle may raise its center of gravity and may make it more susceptible to loss of control and/or rollover, which may result in death or serious injury. We strongly recommend that you offset the loss of rollover resistance as much as possible by increasing tire track width, and that you equip the vehicle with a functional roll bar and cage system. Wear seat belts and shoulder harnesses at all times, and avoid situations where a side rollover may occur.

Designed for use with stock coil springs

Not recommended for use with any other front lift products

Priced and sold in pairs
Includes 2 Shocks

Other products you may be interested in:

Customer reviews

Rated 4.1666666666667 out of 5 stars
6 reviews
5 stars 4 66 %
4 stars 1 16 %
3 stars 0 0 %
2 stars 0 0 %
1 star 1 16 %

6 reviews for Bilstein 5100 0-2.5″ Lift Front Adjustable Shocks for 2000-2006 Toyota Tundra

    Load more

    Add a review

    Use one of the allowed file type: jpg,png,jpeg.

      Questions and answers of the customers

        I have a 2006 Tundra TRD Off Road Access Cab. Which has the Toyota Bilstein shocks. Will the 5100s actually give me an additional lift compared to that ?
      1. 0 votes
        QI have a 2006 Tundra TRD Off Road Access Cab. Which has the Toyota Bilstein shocks. Will the 5100...... Read more answer now
        A Everything is correct. These front shocks can be operated with a stock spring. In order to get different lifting heights, you need to rearrange the rings in shock
        2. If i have upper control arms and a diff dropper, could i set the clips to the 5th setting on a tundra double cab 4x4?
      2. 0 votes
        QIf i have upper control arms and a diff dropper, could i set the clips to the 5th setting on a tu...... Read more answer now
        A you may try it
        3. Which circlip do I need to be on to be leveled with the rear?
      3. 0 votes
        QWhich circlip do I need to be on to be leveled with the rear?answer now
        A In order to figure out how much lift you need to level please take existing measurements from center of the wheel hub to the bottom of the fender. Difference between front and rear is how much lift you need to level. https://www.suspensionlifts.com/level.png usually 2'' difference
        4. Do you offer these loaded? If so, what is the part #
      4. 0 votes
        QDo you offer these loaded? If so, what is the part #answer now
        A unfortunately we don't have coils to load them
        5. Can I set to the 4th or 5th clip if I get new UCAs? 2002 Access Cab 4x4 V8.
      5. 0 votes
        QCan I set to the 4th or 5th clip if I get new UCAs? 2002 Access Cab 4x4 V8.answer now
        A please just be sure not to exceed 2.5'' of height from stock and to use diff drop kit
        6. Will these fit with front coil springs: 48131-AF100 and 48131-AF090 on 2002 4Runner? If so, on which circlip position? Planning OME 890 in the rear with 33-187174 shocks.
      6. 1 vote
        QWill these fit with front coil springs: 48131-AF100 and 48131-AF090 on 2002 4Runner? If so, on wh...... Read more answer now
        A if you are using OEM front coils - you can put front shocks on the highest notch settingwith lifted coils you can use these shocks on the lowest notch setting
        7. This is the replacment for the 6" rcd kit right? do you offer coils for these as well?
      7. 0 votes
        QThis is the replacment for the 6" rcd kit right? do you offer coils for these as well?answer now
        A it's not recommended to go higher than 2,5'' of lift
        8. can scalloping tire pattern occur if I set circlips at 5 for 2005 tundra 4x4.
      8. 0 votes
        Qcan scalloping tire pattern occur if I set circlips at 5 for 2005 tundra 4x4.
        There are no answers for this question yet. Answer now
        9. In response to your answer from yest. I have a v8, so does that mean I should use the 3rd clip? How will it give me close to 3" of lift? The diagram said a little over 1"?
      9. 0 votes
        QIn response to your answer from yest. I have a v8, so does that mean I should use the 3rd clip? H...... Read more
        There are no answers for this question yet. Answer now
        10. I have a 2002 tundra access cab. I want to level the truck but this says I can only put the 3rd clip. Why is that? Also can this be used with stock upper control arms?
      10. 0 votes
        QI have a 2002 tundra access cab. I want to level the truck but this says I can only put the 3rd c...... Read more answer now
        A UCA's are recommended but not required, the benefit of the UCA's is to fix the caster when the vehicle is getting aligned and also helps you a lot with articulation on the front end.AS access cabs are lighter and if you have V6 engine (not so heavy as V8) the 3rn notch will give you close to 3'' liftso 2nd notch will be enough for leveling
        A I have a v8, so does that mean I should use the 3rd clip? How will it give me close to 3" of lift? The diagram said a little over 1"?
        A if not 4x4 then you can go up to 5th clip!!
        11. Can I use with all stock parts ? Like cool over it is all stock no lift would just replace with Holstein I have now 2004 tundra 2x4
      11. 0 votes
        QCan I use with all stock parts ? Like cool over it is all stock no lift would just replace with H...... Read more answer now
        A Yes These shocks can only be used with stock coils.
        12. I have a 2002 Tundra SR5 6 Cylinder rear wheel drive with a FabTech suspension 2.5 lift, would the 5100 adjustable set work? Thanks.
      12. 0 votes
        QI have a 2002 Tundra SR5 6 Cylinder rear wheel drive with a FabTech suspension 2.5 lift, would th...... Read more answer now
        A Will work if stock height shocks were used previously
        A They are the FabTech springs and shocks now, wanted to up grade with the Bilsteins 5100.
        13. Is it ok to have these struts instead of stock with a tough country 5 inch lift in the front which has the knuckles and a spacer for the front ?
      13. 0 votes
        QIs it ok to have these struts instead of stock with a tough country 5 inch lift in the front whic...... Read more answer now
        A you technically can, because these can be set at stock height and utilized with a spacer, but do we do not recommend.
        14. Are these sold in pairs or individually?
      14. 0 votes
        QAre these sold in pairs or individually?answer now
        A Includes: 2 Shocks as shown
        15. If I have an existing leveling kit ( 3 in. ) on my 03 tundra sidestep. Would it be possible to leave the shocks at the stock level and continue using the 3" spacer? And, do you offer the whole set rather than by pairs?
      15. 0 votes
        QIf I have an existing leveling kit ( 3 in. ) on my 03 tundra sidestep. Would it be possible to le...... Read more answer now
        A It's possible but please not exceed 3''of total front lift - can be harmful for the suspension.We can offer * * * https://www.suspensionlifts.com/shop/toyota-tundra/00-06-toyota-tundra/complete-lift-kits-00-06-toyota-tundra/bilstein-5100-height-adjustable-front-rear-shocks-for-2000-2006-toyota-tundra/
        16. Do you need to run 2 inch over stock coils with these or can you run stock coils?
      16. 0 votes
        QDo you need to run 2 inch over stock coils with these or can you run stock coils?answer now
        A Hello If you need 2 inch lift you can use stock coils circlip location 4 as in table
        17. I have a 2.5 inch lift above my strut With these shocks be smother then oreilly shocks or will it be about the same since the coil is compressed ?
      17. 0 votes
        QI have a 2.5 inch lift above my strut With these shocks be smother then oreilly shocks or will it...... Read more answer now
        A Hello These shocks have parameters Extended Length (IN): 18.35 Inch Compressed Length (IN): 13.23 Inch Rod Diameter (IN): 0.55 Inch Upper Mounting Style: Stem Lower Mounting Style: Eyelet Can you compare them with yours?
        18. I have a 06 tundra sr5 2wheel dr, and just won't to level front are raise more what shocks nand cost$
      18. 0 votes
        QI have a 06 tundra sr5 2wheel dr, and just won't to level front are raise more what shocks nand c...... Read more answer now
        A Hello, in order to figure out how much lift you need to level please take existing measurements from center of the wheel hub to the bottom of the fender. Difference between front and rear is how much lift you need to level. https://www.suspensionlifts.com/level.pngThese shocks will not lift your truck by themselves - some lift kit options as add-a-leafs or longer coils or maybe spacers will be required for a lift. These shocks are only longer than the stock shocks - designed for use with the existing lift.
        19. Will these work with Eibach Pro Lift Springs ?
      19. 0 votes
        QWill these work with Eibach Pro Lift Springs ?answer now
        A YEs, they will work, but please run them on the lowest notch adjustment not to overlift the truck more then 3'' from stock
        20. I’ve got an all stock 2005 Tundra 4x4 that I’m just trying to level the front of - maybe 2-2.5” in the front. Will these shocks give me what I’m looking for alone? Or do I need something else as well? If so, what setting should I set them to?
      20. 0 votes
        QI’ve got an all stock 2005 Tundra 4x4 that I’m just trying to level the front of - maybe 2-2.5” i...... Read more answer now
        A These shocks will work.Diff drop kt is recommended for 4WD trucks for 1.5'' of front lift and more to increase the CV axles life.https://suspensionlifts.com/shop/toyota-4runner/1996-2002/front-differential-drop-kit-1995-2004-toyota-tacoma-02-4runner-06-tundra-sequoia-4x4/
        21. I have a 2004 Tundra Crew Cab and want to use the Circlip location #5 to get maximum leveling height, If I buy the 1" diff. drop kit can I go from location #4 to location #5 ?
      21. 0 votes
        QI have a 2004 Tundra Crew Cab and want to use the Circlip location #5 to get maximum leveling hei...... Read more answer now
        A It will work but is not recommended for 4WD
        22. I have original stock billstien shocks withh a tweo inch spacer [ three years old. Can i get the same two in or one and half with 5100 series??
      22. 0 votes
        QI have original stock billstien shocks withh a tweo inch spacer [ three years old. Can i get the ...... Read more answer now
        A Yes, exactly - you can remove your spacers and adjust the Bilsteins to have up to 2,5'' lift using your coil springs
        23. Thinking about buying for a 2006 tundra access cab. I see you can only raise to level 3, will I need anything else aside from these shocks (I.e. Diff drop, porportioning valve extension etc)
      23. 0 votes
        QThinking about buying for a 2006 tundra access cab. I see you can only raise to level 3, will I n...... Read more answer now
        A Nothing else is required.
        24. Why is it that I can't set the clips at the 2.5" mark on a 2005 Tundra Double Cab 4x4?
      24. 0 votes
        QWhy is it that I can't set the clips at the 2.5" mark on a 2005 Tundra Double Cab 4x4?answer now
        A The cv axles will hit the lower control arms and will break

      Send me a notification for each new answer.
      ATTENTION STATE OF CALIFORNIA CONSUMERS. WARNING: Cancer and reproductive harm – www.p65warnings.ca.gov

      Related products

      -

      Original price was: $314.00.Current price is: $281.78.

      More than 30 available

      More than 30 available

      1-3 Day Transit Time

      Share (7)
      Total: 2 Total: 1 Total: 0 Total: 4