Your cart is currently empty!
OME 2″ Front Lift Coils for 2016-2023 Toyota Tacoma
Sale!
Description
OME 2″ Front Lift Coils for 2016-2023 Toyota Tacoma
OME 2″ Front Lift Coils for 2016, 2017, 2018, 2019, 2020, 2021, 2022, 2023, 2023, 2023, 2023 Toyota Tacoma
Part: OME-16 (2887, 2888, 2886)
Three spring options were chosen to cater for: No Bar, Bar or Winch only and Bar + Winch vehicle setups. As the suspension design is the same as the previous model Tacoma, existing coil part numbers could be used, noting some slight change in application. Factory geometry allowed for a 2-inch lift and while still maintain an adequate level of droop.
Select coils from options- All coils are sold in pairs
- 2887 – 2″ lift standard coils – Stock weight
- 2888 – Medium 2″ lift – With bumper only or winch only
- 2886 – Heavy – 2″ lift – With bumper and winch
We recommend Old Man Emu shocks (sold separately) to be used with OME coils. These coils will NOT work on stock shocks.
Customer reviews
Add a review
Questions and answers of the customers
-
Im running a tacoma 2016 with bilstein 5100s on the max leveling 2" on the front, and im about to put a winch and a bumper, the bumper is not thay heavy... the bumper + winch will be about 45kg (99lb) should i change the stock springs for a medium or heavy spring?
- QIm running a tacoma 2016 with bilstein 5100s on the max leveling 2" on the front, and im about to...... Read more answer nowA Medium will be good for 99 lbsI have a set of 5100 for my 2018 sport. I have a light armor bumper, winch and skid adding up to 175lbs. What size coils and what setting on the 5100s should I use?
- QI have a set of 5100 for my 2018 sport. I have a light armor bumper, winch and skid adding up to ...... Read moreThere are no answers for this question yet. Answer nowWhat sort of ride difference will I experience if I install the coils rated for winch and bumper on a stock bumper? (Will upgrade bumper and winch at a later time)
- QWhat sort of ride difference will I experience if I install the coils rated for winch and bumper ...... Read more answer nowA A stiff ride...Will these coils work with the bp51 shocks?
- QWill these coils work with the bp51 shocks?There are no answers for this question yet. Answer nowWhy did I get 1" of lift with these? I have an aluminum cbi t3 bumper with no winch. I used Bilstein 5100 at lowest setting and used 888's like you recommend.
- QWhy did I get 1" of lift with these? I have an aluminum cbi t3 bumper with no winch. I used Bilst...... Read moreThere are no answers for this question yet. Answer nowHello, I currently have an OME lift. 2" in the front and 3" in the rear. am wanting to add a winch and a Lo Pro bumper to the front. Total weight of roughly 125lbs of added weight. What coils do you recommend? Would the 887's be fine or should I go with the 888's. I am wanting the lift to be around 1.5in to 2in with the added weight.
- QHello, I currently have an OME lift. 2" in the front and 3" in the rear. am wanting to add a winc...... Read more answer nowA We'd recommend 888 coils for 4cyl engine and access cab, or stronger 886 coils for heavier double cab + V6 engineI have the 5100s struts all around my 16 Tacoma TRD sport 4x4 long bed, will these coils (888 medium) improve with a smoother ride through speed bumps and uneven roads?
- QI have the 5100s struts all around my 16 Tacoma TRD sport 4x4 long bed, will these coils (888 med...... Read more answer nowA Hello 887 – 2″ lift standard coils – Stock weight 888 – Medium 2″ lift – With bumper only or winch only 886 – Heavy – 2″ lift – With bumper and winch What do you have? These coils are designed for different loads, they do not quench vibrations, shocks make your trip more comfortableI am planning to get the 887 OME front lift coils with Bilstein 5100s for my 2017 Tacoma TRD OR 4x4 Double Cab. Would this be okay to do while leaving the rear suspension stock until buying an AAL/shock combo later in the future?
- QI am planning to get the 887 OME front lift coils with Bilstein 5100s for my 2017 Tacoma TRD OR 4...... Read more answer nowA Yes, of course you may do it.Rear is usually higher then front from stock so you'll loose front rake - the truck will be more leveled.Please use 5100s on the lowest notch adjustment in order not to overlift the truckWill these work on a 2018 Tacoma OR while running the Bilstein 5100’s set at 1 inch in the front?
- QWill these work on a 2018 Tacoma OR while running the Bilstein 5100’s set at 1 inch in the front?answer nowA They will give you about 2'' lift on the lowest notch and 3'' or even slightly more (depending on your truck front weight) on the 2nd notch.It is not recommended to have more then 3'' of liftwill the 886 coils work with the bilstein 6112?
- A
No, they wont work.
would this work for a 2012 fj cruiser running Bilstein 5100. currently with 2884s added arb bumper with winch with a front droop. wanted to level it thanks - Qwould this work for a 2012 fj cruiser running Bilstein 5100. currently with 2884s added arb bumpe...... Read more answer nowA https://suspensionlifts.com/shop/toyota-fj-cruiser/toyota-fj-cruiser-2010-2011-2012-2013/front-lifts/front-ome-coils-for-07-14-toyota-fj-cruiser-03-18-4runner/ * * * Please choose 886 or 887 coilsis this a pair of coils?
- A Yes, priced for pairI have the bilstein 5100 front & rear. Looking for about an inch more up front and 2 in in the rear. Want to add a lead for the rear, recommendation for the front? Obviously want to avoid spacers
- QI have the bilstein 5100 front & rear. Looking for about an inch more up front and 2 in in th...... Read moreThere are no answers for this question yet. Answer nowWill these work with stock 2016 tacoma sr5 shocks?
- A It will not work on stock height shocks - 2'' longer OME shocks are recommended * * * https://suspensionlifts.com/shop/toyota-tacoma/2005-2015/shocks-05-15/front-0-2-25-lift-ome-shocks-sport-90021-05-14-tacoma-03-09-4runnerfj-cruiser/can I use these coil springs with the 2016 factory yellow bilsteins until I upgrade to ome shocks latter??
- Qcan I use these coil springs with the 2016 factory yellow bilsteins until I upgrade to ome shocks...... Read more answer nowA NoI just got my BilsteIn 5100 from you guys. Great service and fast shipping. I'm looking to level out my front for now then later do coils and aal for a couple inches of even lift. I see you recommend using OME shocks with these. What do you recommend using with the 5100's in that case? 2016 Tacoma OR access cab
- QI just got my BilsteIn 5100 from you guys. Great service and fast shipping. I'm looking to level ...... Read moreThere are no answers for this question yet. Answer nowWill these coils work with bilstein 5100?
- A
Yes, but we recommend OME shocks with OME coils
You may also like…
ATTENTION STATE OF CALIFORNIA CONSUMERS. WARNING: Cancer and reproductive harm – www.p65warnings.ca.gov
Related products
- Sale!
Rancho quickLIFT 1.75″ lift coilovers for 1995-2004 Tacoma 4WD
(0 reviews)Original price was: $478.61.$435.10Current price is: $435.10. - Sale!
Bilstein/RCD 5100 Front 0-2.5″ Lift Adjustable Shocks 1995-2004 Tacoma
(10 reviews)Original price was: $269.99.$249.00Current price is: $249.00.
5 reviews for OME 2″ Front Lift Coils for 2016-2023 Toyota Tacoma